Categories
Ningbo Hi-Tech Zone Webit Telecommunication Equipments Co., Ltd. >> IP55 Outdoor Cabinets for Pole Mount
IP55 Outdoor Cabinets for Pole Mount
| Price: | Negotiable/Piece |
|---|---|
| Trade Terms: | FOB,CFR,CIF |
| Min Order: | 10/Piece |
| Pay Type: | L/C,T/T,Western Union |
WB-OD-H follows the IEC's standardized International Protection Code system for measuing capabilities.
The IP Code reflects the degree of protection as "IP" followed by two numbers;
the first digit shows the extent to which enclosures are protected against particles/dust, and protection to others from enclosed hazards.
The second digit indicates the extent of protection against water.
We carry IP65 enclosures which offers complete protection against particles/dust, and a strict control of protection against water. Because all of our enclosures strictly observe the standards, you can expect first-rate and competitively-priced outdoor enclosures.
IP65= Enclosures' Characteristics:
Complete protection from dust, oil, and other non-corrosive material
Complete protection from contacting with enclosed equipment
Protection from water, up to water projected by a nozzle against enclosure from any direction
Available in wall-mounted, free standing, trough, and telegraph pole mounting
Silk-screening logo, anodizing, or engraving services are available
Custom with cutouts,insulation, hinges, latches or locks
IP55= Enclosures' Characteristics:
Complete protection from dust, oil, and other non-corrosive material
Complete protection from contacting with enclosed equipment
Protection from water, up to water projected by a nozzle against enclosure from any direction
Available in wall-mounted, free standing, trough, and telegraph pole mounting
Silk-screening logo, anodizing, or engraving services are available
Our Weatherproof Enclosures have the solution for products in industrial environments with high demands on safety, durability, reliability and cost saving for the end user.
• Safety - tested and approved by third party testing laboratories.
• Durability - materials used give a high durability in tough conditions and environments.
• Reliability - high quality contacts ensure reliability. (IP55 or higher)
• Cost saving - designed for quick and easy installation.
• Construction - Body and door/cover are formed from 16 or 18 gauge cold-rolled steel. (1.0/1.2mm)
- w/ removable inner door are formed from sheet steel, depth adjustable
- Removable inner panel is formed from 14 or 16 gauge galvanized sheet
- Grounding and panel mounting hardware provided.
Features
- Lockable front door installed with earthing cable
- Strong double wall type framework
- 19" galvanized/powder coated mounting profile for device installation
- Bottom panel cable entry, can be perfectly fix to floor
- Side louver vented aread for airflow
- Circuit board installed as per customized requirement
- 4 x galvanized rails
- peripheral is optional [ lighting system,smoke alarm,temperature sensor etc..]
MAKE TO ORDER service. below size is suggested for choose.
Width: 600 mm
Depth: 450, 600 mm
Height: 4U, 6U ,9U ,12U, 15U, 18U
Standard and Material:
Comply with
ANSI/EIA,RS-310-D;IEC297-2;DIN41491:PART1;DIN41494:PART7;GB/T3047.2-92 standard and ETSI standard.
Surface Finish:Degrease, acid pickling, rust prevention and parkerizing,pure water cleaning, static electricity powder coating
Material:SPCC cold rolled steel or Zinc-plated plate or stainless steel
Thickness:Mounting profile:1.5mm,others: 1.00~1.20 mm
IP degree: IP-55 or IP-65
Body color:RAL5012(Top cover and base);RAL7035(The others)
Environment conditions:
Temperature: -40°C ~+ 60°C
Relative Humidity: ≤95% (at 40°C)
Atmospheric pressure : 70kPa ~ 106kPa
Technical Specifications:
The protection grade reaches IP55.
Working with wavelength of 850nm, 1310nm and 1550nm.
Pressurization between the frame high voltage protection earth device and the frame: ≥3000V (DC) / 1 minute without any breakdown or flashover.
Insulation resistance between the frame high voltage protection earth device and the frame: ≥20,000M Ω/ 500V (DC).
Each surface of the cabinet can bear a vertical pressure over 980N.
The outermost part of the door can bear a vertical pressure over 200N when the door is open.
The fixing position of cable can bear an axial tensile force 1000N, as well as three times of recyclable torsion of ±90°.
Mechanical durability: No damage for all connectors and adaptors after 500 mating times.
Our Services
Sample Service: We will collect some sample fees, will refund after you place order.
Package design support: We have brand team for your customized design.
DDP service : We are willing to do "DOOR to DOOR" service for those customers who are busy with others work and no time spend on shipment.
FAQ
1) What is your Payment term?
---T/T, L/C, Western Union could be accepted.
2) What is your Trade term?
---EXW, FOB, CNF, CIF is also ok.
3) What is the Loading Port?
--- Ningbo or Shanghai port.
4) What is your MOQ?
---MOQ of most our products is 5pcs, different items will be different. We have indicated the MOQ for each item in the price list.
5) What is your Product Warranty?
---As Europe market, we have CE RoHS and other international safety standard for our products.
---As other market, international safety standard certificate is also be provided.
The IP Code reflects the degree of protection as "IP" followed by two numbers;
the first digit shows the extent to which enclosures are protected against particles/dust, and protection to others from enclosed hazards.
The second digit indicates the extent of protection against water.
We carry IP65 enclosures which offers complete protection against particles/dust, and a strict control of protection against water. Because all of our enclosures strictly observe the standards, you can expect first-rate and competitively-priced outdoor enclosures.
IP65= Enclosures' Characteristics:
Complete protection from dust, oil, and other non-corrosive material
Complete protection from contacting with enclosed equipment
Protection from water, up to water projected by a nozzle against enclosure from any direction
Available in wall-mounted, free standing, trough, and telegraph pole mounting
Silk-screening logo, anodizing, or engraving services are available
Custom with cutouts,insulation, hinges, latches or locks
IP55= Enclosures' Characteristics:
Complete protection from dust, oil, and other non-corrosive material
Complete protection from contacting with enclosed equipment
Protection from water, up to water projected by a nozzle against enclosure from any direction
Available in wall-mounted, free standing, trough, and telegraph pole mounting
Silk-screening logo, anodizing, or engraving services are available
Our Weatherproof Enclosures have the solution for products in industrial environments with high demands on safety, durability, reliability and cost saving for the end user.
• Safety - tested and approved by third party testing laboratories.
• Durability - materials used give a high durability in tough conditions and environments.
• Reliability - high quality contacts ensure reliability. (IP55 or higher)
• Cost saving - designed for quick and easy installation.
• Construction - Body and door/cover are formed from 16 or 18 gauge cold-rolled steel. (1.0/1.2mm)
- w/ removable inner door are formed from sheet steel, depth adjustable
- Removable inner panel is formed from 14 or 16 gauge galvanized sheet
- Grounding and panel mounting hardware provided.
Features
- Lockable front door installed with earthing cable
- Strong double wall type framework
- 19" galvanized/powder coated mounting profile for device installation
- Bottom panel cable entry, can be perfectly fix to floor
- Side louver vented aread for airflow
- Circuit board installed as per customized requirement
- 4 x galvanized rails
- peripheral is optional [ lighting system,smoke alarm,temperature sensor etc..]
MAKE TO ORDER service. below size is suggested for choose.
Width: 600 mm
Depth: 450, 600 mm
Height: 4U, 6U ,9U ,12U, 15U, 18U
Standard and Material:
Comply with
ANSI/EIA,RS-310-D;IEC297-2;DIN41491:PART1;DIN41494:PART7;GB/T3047.2-92 standard and ETSI standard.
Surface Finish:Degrease, acid pickling, rust prevention and parkerizing,pure water cleaning, static electricity powder coating
Material:SPCC cold rolled steel or Zinc-plated plate or stainless steel
Thickness:Mounting profile:1.5mm,others: 1.00~1.20 mm
IP degree: IP-55 or IP-65
Body color:RAL5012(Top cover and base);RAL7035(The others)
Environment conditions:
Temperature: -40°C ~+ 60°C
Relative Humidity: ≤95% (at 40°C)
Atmospheric pressure : 70kPa ~ 106kPa
Technical Specifications:
The protection grade reaches IP55.
Working with wavelength of 850nm, 1310nm and 1550nm.
Pressurization between the frame high voltage protection earth device and the frame: ≥3000V (DC) / 1 minute without any breakdown or flashover.
Insulation resistance between the frame high voltage protection earth device and the frame: ≥20,000M Ω/ 500V (DC).
Each surface of the cabinet can bear a vertical pressure over 980N.
The outermost part of the door can bear a vertical pressure over 200N when the door is open.
The fixing position of cable can bear an axial tensile force 1000N, as well as three times of recyclable torsion of ±90°.
Mechanical durability: No damage for all connectors and adaptors after 500 mating times.
| Material | SPCC cold rolled steel or SS stainless steel |
| Thickness | 0.8mm, 1.0mm, 1.2mm, 1.5mm, 2.0mm and etc are all available to be designed for the material used |
| Processing | Laser cutting, CNC punching, CNC bending, Hand welding, stamping, etc |
| Surface treatment | Painting, Plasma electrostatic painting, hot galvanized, powder coating, polishing, brushing, cataphoresis, etc |
| Certification | ISO9001:2000 , CE, RoHS , SGS |
| Delivery date | Within 30 days |
| IP degree | IP55&65 |
| Water proof | 0.2Mpa,10mm/min,30min,Endure water pressure 0.2Mpa; Water spray intensity :10mm/min .( for 30 min) No leakage inside Comply with GB 4208-1993 IP65 standard |
| Fire proof | Non-metal marterial burning time< 1s (put onto blue fire over 30s) |
| Noise proof | < 55db |
| Voltage test | Comply with 48V DC or 220V AC |
| Resistance test | resistance from earthing bolt to body <0.01Ω |
| Working environment | Can normally work from -30 to 65 ° |
| Color standard | Comply with GB/T 3181-1995 sheet 2 's color requirement |
| Painting standard | Comply with GB/T 9286-1998 sheet 1, Class-1 |
| 9. Tolerance | +/-3mm |
Our Services
Sample Service: We will collect some sample fees, will refund after you place order.
Package design support: We have brand team for your customized design.
DDP service : We are willing to do "DOOR to DOOR" service for those customers who are busy with others work and no time spend on shipment.
FAQ
1) What is your Payment term?
---T/T, L/C, Western Union could be accepted.
2) What is your Trade term?
---EXW, FOB, CNF, CIF is also ok.
3) What is the Loading Port?
--- Ningbo or Shanghai port.
4) What is your MOQ?
---MOQ of most our products is 5pcs, different items will be different. We have indicated the MOQ for each item in the price list.
5) What is your Product Warranty?
---As Europe market, we have CE RoHS and other international safety standard for our products.
---As other market, international safety standard certificate is also be provided.
| Prod Model: | WB-OD-H |
|---|---|
| Markets: | North America,South America,Eastern Europe,Southeast Asia,Africa,Oceania,Mid East,Eastern Asia,Western Europe |
| Material: | SPCC Cold Rolled Steel |
| Package: | Cartons, Wooden Case, Wooden Pallets |
| Logo: | Silk Print, Aluminum Sticker, Rubber Sticker |
| Shipping: | Sea, Air, Train, Truck |
| Protection Data: | IP55 |
| Door: | Solid Metal Door |
| Means Of Transport: | Land, Ocean, Air |
| Surface Finish: | Waterproof,Dust Proof |
| Type: | IP65 Outdoor Cabinets |
| Installation: | Assemble |
WebiTelecomms, An energetic and dynamic company which specializes in INTEGRATED CABLING service, built in 2003. For these years, WebiTelecomms present her trustworthy and comprehensive products around the world.
Whether you are a small and medium enterprise or a large corporate customer, we understand that you require a high level of support at both pre-sales and post-sales side. At Webitelecomms, Everything will be shared to you.
Qualified design is given by engineers team with the latest feature.
Considerate quotation to be offered by sales team in-time as per your indeed need.
80, 000 sqm workshop field stands and looks for large challanges.
Trained labors and managements will be basic support.
So, WHAT YOU CAN GET from our team?
Creative and thoughtful idea
Honest and Responsible service
Flexible and technical response.
The point is: Trusted and affordable products
We never stop asking ourselves how we can make the customer experience better, and every day, we find an answer.
Choosing our services will not be the last good decision you make!
Whether you are a small and medium enterprise or a large corporate customer, we understand that you require a high level of support at both pre-sales and post-sales side. At Webitelecomms, Everything will be shared to you.
Qualified design is given by engineers team with the latest feature.
Considerate quotation to be offered by sales team in-time as per your indeed need.
80, 000 sqm workshop field stands and looks for large challanges.
Trained labors and managements will be basic support.
So, WHAT YOU CAN GET from our team?
Creative and thoughtful idea
Honest and Responsible service
Flexible and technical response.
The point is: Trusted and affordable products
We never stop asking ourselves how we can make the customer experience better, and every day, we find an answer.
Choosing our services will not be the last good decision you make!