USB Charging LED Cabinet Energy Saving Smart Sensor Night Light

Mini Ultra-thin closet light
PIR Motion & light sensor: At dark place, it will light up automatically when you get into 10ft detection range, and auto go out 15 seconds after you get out of the range;
Suitable for stairway, drawer, under-cabinet, pantry, bedroom, wardrobe, workshop, bookshelf, attic, closet, basement, hallway, corridor, headboard, trunk lighting, etc.
 
Three modes
ON: constant lighting
OFF: turn light off
AUTO: auto-sensing state, light up automatically in the dark when motion is
Rechargeable: Built-in 500mah lithium battery,It can last for 4 hours when fully charged at ON mode and Last 2 months at AUTO mode. Compatible with wall charger, PC USB port;
High brightness: pure white 150lm, 6pcs high bright Epistar SMD LED chips, environment friendly and low power consumption;
Compact motion sensor LED under cabinet light adopt with high bright Epistar 2835 LED light source, combining passive infrared (PIR) technology to detect motions.
Under AUTO mode, it will light up automatically in the dark when a motion is detected and auto turn off for hands-free convenience.
Easy installation: magnet and 3M adhesive tape, could be hung and stick-on No tools, screws or nuts are required when installation.
Detection range: 10ft
LED life: Above 80000h
Current: 500mA
Delay time: 15 seconds
Input voltage: 5V DC
Output voltage: 3.7V
Brightness: 150lm
Working temperature: -10 ~ 50ºC
Motion angle: 120°
 



Notices
-As built-in photo sensor, it may not work in AUTO mode in daylight or bright surroundings.
-Non-waterproof, do not use it in any heavy humidity or low temp location.
-Try not to mount 2 lights so near. They may interact each other in AUTO mode.

FAQS:

Q: 1. what would the lead time be? A: Sample is 1-3 working days, mass production time is 3-8 working days for less than 1000 PCS.

Q: 2. Can we place a mixed order? A: It's ok. But normally for mixed order, MOQ for each item is 100pcs.

Q: 3. Can I have a dummy sample even pre-production before I send you the order? A: Yes, we can send you the dummy samples or samples with logo for your approval first.

Q: 4. Do you offer guarantee for the products? A: Yes, we offer one year guarantee for the products.

Q: 5. How to follow in the order if I have logo to print? A: Firstly, we will prepare artwork for visual confirmation, and next we will produce a real sample for your second confirmation. If mockup is ok, finally we will go to mass production.

Q: 6. what are "Color Corrections" and the "Color Match Guarantee"? A: Color Corrections include each individual image review and adjusting of density, color tones, saturation and lighting.